Free Delivery when you spend £35.00 or more
Troubleshooting Quiet AirPods: Increase Volume Easily

Troubleshooting Quiet AirPods: Increase Volume Easily

Troubleshooting Quiet AirPods: Increase Volume Easily

AirPods have revolutionized the way we listen to music, podcasts, and other audio content. However, like any other device, they are not immune to issues. One common problem that users often encounter is low volume. If you've been struggling with quiet AirPods, don't worry. This comprehensive guide will walk you through some simple troubleshooting steps to help you increase the volume easily.

Understanding the Issue

There could be several reasons for this, ranging from simple settings adjustments to more complex hardware issues.

One common cause is incorrect settings on your device. If your volume is set too low, or if certain settings are not configured correctly, it can affect the volume of your AirPods. Another possible cause is dirt or debris in the AirPods, which can block the sound.

Software issues can also cause low volume problems. If your device's software is outdated, it may not be compatible with the latest AirPods features, resulting in lower volume. Lastly, the issue could be with the AirPods themselves. If they are damaged or defective, they may not produce sound at the correct volume.

Checking the Basics

Adjust the Volume: The first and most obvious step to take when your AirPods are quiet is to check the volume settings on your device. Make sure the volume is turned up high enough. You can do this by pressing the volume up button on your device, or by going into the settings and adjusting the volume slider.

If you're using an iPhone, you can also check the volume limit settings. Go to Settings > Music > Volume Limit and make sure it's set to the maximum. If it's set too low, it can limit the volume of your AirPods.

Clean Your AirPods: Dirt, dust, and earwax can accumulate in your AirPods over time, blocking the sound. To clean your AirPods, use a soft, dry, lint-free cloth. Avoid using sharp objects or abrasive materials, as they can damage the AirPods.

For the speaker mesh, use a dry cotton swab. Be gentle and avoid pushing the debris into the AirPods. If necessary, you can slightly dampen the cotton swab with isopropyl alcohol, but make sure it's not too wet.

Advanced Troubleshooting

Reset Your AirPods:  If adjusting the volume and cleaning your AirPods doesn't work, you can try resetting them. This can solve a variety of issues, including low volume. To reset your AirPods, follow these steps:

  • Put your AirPods in the charging case and close the lid.
  • Wait for about 30 seconds, then open the lid.
  • On your device, go to Settings > Bluetooth and tap the "i" icon next to your AirPods.
  • Tap "Forget This Device" and confirm your decision.
  • With the AirPods still in the open case, press and hold the button on the back of the case until the status light flashes white.
  • Reconnect your AirPods to your device.

    Update Your Device: Outdated software can cause compatibility issues with your AirPods, resulting in low volume. To ensure your device is up to date, go to Settings > General > Software Update. If an update is available, download and install it.

    If you're using a non-Apple device, the process may be slightly different. Refer to the manufacturer's instructions for updating your device.

    When to Seek Professional Help

    If you've tried all the above steps and your AirPods are still quiet, it may be time to seek professional help. There could be a hardware issue with your AirPods that requires repair or replacement.

    You can contact Apple Support for further assistance. If your AirPods are still under warranty, the repair or replacement may be covered. However, if they're out of warranty, you may need to pay for the service.

    Remember, it's always best to seek help from a professional rather than trying to fix hardware issues yourself. Attempting to repair your AirPods on your own could cause further damage and void your warranty.


    Dealing with quiet AirPods can be frustrating, but with a little troubleshooting, you can often resolve the issue yourself. Remember to check the basics first, like the volume settings and cleanliness of your AirPods. If that doesn't work, try resetting your AirPods and updating your device's software. If all else fails, don't hesitate to seek professional help. With these tips, you'll be back to enjoying your favorite tunes at the right volume in no time.

    While you're taking the time to ensure your AirPods are at their best, don't forget about the device they're paired with. Case Monkey offers a variety of protective cases for different phone models, ensuring your phone stays safe while you enjoy your music to the fullest. Check out our products and find the perfect case to safeguard your phone from life's little accidents.